Damp and mould in a rented home is one of the most common, and most contested, issues in private renting. The difficulty is that the word "damp" covers several distinct problems with different causes, different responsible parties and different solutions. Understanding which type you are dealing with is the starting point for resolving it, because the approach that works for condensation-related mould on a bathroom ceiling is not the same as the approach needed for rising damp in a ground-floor wall.
Condensation: What it is and what tenants can do
Condensation forms when warm, moisture-laden air meets a cold surface. In winter, when windows and external walls are cold and heating is intermittent, condensation builds up on glass, tiles and walls, particularly in bathrooms, kitchens and poorly ventilated bedrooms. Left unchecked, it creates the conditions for black mould, which grows on the surface of walls, around window frames and on soft furnishings.
Many of the day-to-day actions that reduce it are in the tenant's hands. However, condensation can also be made worse by issues only a landlord can fix, such as missing or faulty extractor fans, poor insulation, inadequate heating or defective windows. Where these play a part, they should be reported.
Ventilating the property is the most effective step. Opening windows for at least a few minutes in the morning, using extractor fans in the kitchen and bathroom during and after cooking or bathing, and keeping trickle vents open where fitted all reduce the amount of moisture in the air significantly.
Heating the property evenly and consistently at a low level, rather than heating it intensely for short periods and then letting it cool, keeps surfaces warmer and reduces the temperature difference that causes condensation to form.
Drying clothes on indoor airers without ventilation adds a significant amount of moisture to the air. Where possible, use a tumble dryer or dry clothes in a well-ventilated room with a window open. Pushing furniture against external walls restricts airflow and creates cold spots where mould is more likely to form. Keeping a small gap between furniture and external walls helps.
Where mould has already appeared and condensation is the cause, it can be cleaned using a diluted mould-removal solution, and the conditions that allowed it to form should be addressed. Reporting it to the landlord is still advisable, as they need to know about it and it is worth having a written record.
Rising damp, penetrating damp and leaks: The landlord's responsibility
Not all damp is caused by condensation. Rising damp occurs when ground moisture travels up through the walls of a property, typically through a failed or absent damp-proof course. It usually appears as a tide mark of discolouration on lower walls, often with salt deposits on the plaster surface, and does not respond to tenant-side ventilation measures because the moisture source is structural.
Penetrating damp comes from water entering through the fabric of the building, typically through a damaged roof, faulty guttering, cracked render or defective pointing around windows. It tends to appear in patches on upper walls or ceilings, and its location and shape usually reflect the route the water is taking through the building.
Both of these are structural defects that a tenant cannot resolve and should not be expected to. Under Section 11 of the Landlord and Tenant Act 1985, landlords are legally required to keep the structure and exterior of a rented property in repair, including the roof, walls and damp-proof course. This duty generally applies once the landlord has been told about the problem. Landlords must also ensure the property is fit for human habitation, which includes being free from serious damp.
Leaks from plumbing or the roof are the landlord's responsibility to repair. Where water is coming from elsewhere in a building, such as a flat above, the landlord should still arrange for the problem to be investigated and resolved.
The health dimension
The government's guidance on damp and mould, published in updated form in 2023, made clear that damp and mould in the home poses a serious risk to health, particularly for children, older people and those with respiratory conditions. Damp and mould that is serious enough to pose a health hazard can be assessed as a Category 1 hazard under the Housing Health and Safety Rating System, which local councils can enforce against landlords.
The guidance also makes clear that damp and mould should not simply be put down to how a tenant lives in the property, and that landlords should look into the underlying cause.
The Renters' Rights Act will extend Awaab's Law, which sets strict timescales for dealing with hazards such as damp and mould, to privately rented homes. It already applies in social housing, but the date it will take effect for private landlords has not yet been confirmed.
Reporting it to your landlord
Report any damp or mould issue in writing, describe what you are seeing and where, and include photographs with a date. Written reports create a record of when the landlord was notified and what they were told, which matters if the matter is not resolved promptly and you need to escalate it.
If a landlord does not respond adequately to a report of damp or mould that is not caused by condensation, the local council's housing team has enforcement powers and can inspect the property and require the landlord to carry out remedial work.
For landlords, responding promptly, investigating the cause and keeping a record of the action taken is the best way to resolve problems quickly and protect both the property and the tenancy.
Questions about your tenancy? Talk to our lettings team today