Survey types explained: Which survey does your purchase need?

Survey types explained: Which survey does your purchase need?

One of the most consequential decisions a buyer makes, and one of the most frequently under-thought, is whether to commission a survey and which type to choose. The confusion is partly structural: the word survey is used in different ways by different people, and the valuation that a mortgage lender commissions on your behalf is sometimes described as a survey even though it does not serve your interests at all. Understanding what each type of assessment does, and what it cannot tell you, makes the decision considerably clearer.

The mortgage valuation: not a survey

When a mortgage lender approves a purchase, they commission a valuation of the property. This is carried out for the lender’s benefit, not the buyer’s. Its purpose is to confirm that the property is worth approximately what the buyer has agreed to pay, so that the lender’s security is adequate. It does not inspect the condition of the property in any detail, does not look for structural defects, does not assess the roof or the drains, and will not tell you about anything that might cost you money after you move in. The fact that a lender is prepared to lend on the property tells you almost nothing about its physical condition.

Buyers who rely on the mortgage valuation and commission no independent survey of their own are accepting whatever condition the property turns out to be in without any independent professional view on it. That approach carries a risk that is proportional to the age, condition, and complexity of the property.

RICS survey levels: the framework

The Royal Institution of Chartered Surveyors sets the standards for residential surveys in England. Surveys are structured in three levels, each covering progressively more ground and providing progressively more detail.

Level 1: Condition Report

The RICS Home Survey Level 1 is the most basic independent assessment available. It uses a traffic light rating system to describe the condition of different parts of the property, flagging areas rated as requiring attention. It does not include advice on repairs, does not provide a market valuation, and does not go into detail about specific defects or their likely cause. It is most appropriate for conventionally built, modern properties in good condition where the buyer wants a basic documented check rather than a detailed analysis. For properties that are older, non-standard in construction, or show any visible signs of wear, a Level 1 is unlikely to provide sufficient reassurance.

Level 2: HomeBuyer Report

The RICS Home Survey Level 2 is the most widely used survey type and suits the majority of conventional residential purchases. It covers the condition of all accessible areas of the property, uses the same traffic light system as the Level 1, and importantly includes advice on defects found, their likely cause, and what should be done about them. It also highlights any urgent matters that need attention before exchange of contracts and flags any issues that the buyer’s solicitor should investigate further, such as planning queries or building regulations compliance.

The Level 2 is available with or without a market valuation. Adding a valuation to the report gives the buyer an independent view of the property’s market value as well as its condition, which can be useful in negotiations if defects are identified.

A Level 2 survey is appropriate for properties that are conventionally built and in reasonable condition. It is not designed for significantly older properties, properties of non-standard construction, or properties that clearly need substantial work. For those, the Level 3 is the more appropriate choice.

Level 3: Building Survey

The RICS Home Survey Level 3, formerly known as the full structural survey, is the most comprehensive assessment available. It examines the property in considerably greater depth than either of the lower levels, provides a thorough analysis of the construction and condition of all visible and accessible parts, identifies both existing defects and potential future problems, and gives detailed advice on remediation options and likely costs where these can be estimated.

A Level 3 survey does not automatically include a market valuation: that needs to be requested as a separate addition.

The Level 3 is recommended for older properties, typically those built before 1900, properties of non-standard construction such as timber frame, thatched roofs, or concrete panel systems, properties that show visible signs of significant structural movement or damp, and any property where the buyer intends to carry out substantial alterations or renovation.

Choosing the right level

The decision follows a practical framework. For a modern flat or house built in the last twenty to thirty years that appears to be in good condition, a Level 2 is usually appropriate. For a Victorian terrace, an Edwardian semi, a period cottage, a converted barn, or anything that shows signs of its age, a Level 3 gives a more complete picture and often identifies issues that a Level 2 would not examine in sufficient depth.

The cost of the survey is small relative to the purchase price and entirely disproportionate to the cost of an unforeseen structural problem discovered after completion. Commission a RICS-accredited surveyor, check that their experience includes the type of property being purchased, and read the report carefully before proceeding.

Talk to our team about buying your next home



Bookmarking: