A tenant going home for Christmas, or a void property sitting empty between tenancies, creates a set of practical risks that most of the year does not. A property that has no one in it during a cold snap is a property where a frozen pipe, a boiler failure, or a slow leak can develop unnoticed for days. The consequences, a burst pipe flooding through the floors, damage to neighbouring properties in a block, a significant insurance claim, are disproportionate to the preparation required to prevent them. Here is what to check and what to tell tenants before the break.
Know where the stop tap is and make sure your tenant does too
This sounds basic, but it is the single most important piece of information in any water emergency. The stop tap, usually found under the kitchen sink or in a cupboard near the front door, controls the water supply to the whole property. Turning it off immediately in a water emergency dramatically limits the damage.
WaterSafe recommends that anyone leaving a property overnight or for longer should consider turning off the stop tap and draining the system, which removes the water from the pipes and eliminates the risk of a freeze causing a burst. For a void property during a cold spell, this is the most effective precaution available. For a property with a tenant who is travelling, it is worth ensuring they know where the stop tap is, how to use it, and that turning it off before an extended absence is a sensible step.
Keep the name and number of an approved emergency plumber accessible, ideally noted somewhere easy to find in the property, so that whoever encounters a problem first, the tenant returning, a neighbour, or yourself, can act quickly.
Keep the heating running, not off
Turning the heating completely off in a vacant or lightly occupied property is the most common cause of frozen pipes in winter. When indoor temperatures drop to the point at which pipes in unheated spaces, including loft spaces, under-floor voids, and external wall runs, fall below zero, water in those pipes freezes and expands, cracking the pipe from within. The damage is not immediately apparent: it only becomes visible when the pipe thaws and water begins to escape.
WaterSafe advises keeping heating set to at least 14 degrees Celsius overnight and when a property is unoccupied. This is warm enough to keep the building fabric above the freezing threshold without running up significant heating costs. For landlords with smart thermostats installed, this can be set remotely and monitored without needing someone in the property.
If a tenant is leaving for an extended period, advising them in writing to keep the heating ticking over at this minimum temperature is both good practice and useful evidence of the guidance you provided if a freeze-related claim arises.
Insulate exposed pipes and check outside taps
Pipes in unheated areas, including garages, outbuildings, loft spaces, and external runs along outside walls, are the most vulnerable to freezing. Foam pipe lagging is inexpensive and straightforward to fit. If it is not already in place on exposed pipework, the period before winter is the right time to address it.
Outside taps should be isolated and drained before the cold season begins. WaterSafe recommends disconnecting the hose and turning off the internal isolating valve for the outdoor tap, then opening the tap to let any remaining water drain from the pipe. A dripping outdoor tap left connected to a full pipe is a freeze risk.
Condensate pipes on condensing boilers
Condensing boilers, which include most boilers fitted in recent years, have a condensate pipe that often runs outside the building. In cold weather, the moisture in this pipe can freeze, causing the boiler to shut down and display a fault code. This is one of the most common causes of heating failure in cold snaps, and it happens precisely when heating is most needed.
Insulating the condensate pipe with foam lagging reduces the risk significantly. Where a freeze has already occurred, a hot water bottle applied to the pipe from the outlet working back toward the boiler is the recommended thawing method before calling a plumber.
Check your insurance and tenancy terms
Many landlord insurance policies restrict cover if a property is left unoccupied beyond a set period, or may require conditions such as regular inspections or draining the water system to maintain that cover. It is worth checking your policy before any extended empty period to understand what applies to your situation.
Many tenancy agreements also ask tenants to let the landlord or agent know if they will be away for an extended period. This makes it easier to arrange checks and helps ensure the property remains within the terms of your policy while vacant.
Before any property sits empty
The practical checklist before a let property is left unoccupied for more than a few days: confirm the heating is set to a minimum of 14 degrees; locate and test the stop tap; insulate any exposed pipes and the condensate pipe if it runs externally; fix any dripping taps; drain and isolate the outside tap; have the boiler serviced if this has not been done recently; and check your insurance policy’s unoccupancy terms and arrange periodic inspections if required.
Passing this information to tenants before the break, in writing, is straightforward and reduces the risk that an avoidable problem becomes a significant one.
Talk to our lettings team about managing your properties